NuWave PIC Titanium 1800W Portable Induction Cooktop Review
As an Amazon Associate, we may earn a small commission from qualifying purchases.
Short answer: The NuWave PIC Titanium (model 30291LW) is a current single-burner induction cooktop with an 1,800 W maximum, 5°F temperature steps from 50°F to 575°F and a built-in digital temperature probe. It suits a cook who wants an extra burner with fine low-temperature control, owns magnetic cookware and can plug it into a circuit not shared with other high-draw appliances. This review is based on NuWave’s published specifications. We have not lab-tested this cooktop.
Last reviewed: November 1, 2026. NuWave listed the PIC Titanium at $139.99 on that date; prices change often. Deciding between this model and the PIC Gold? Read our NuWave PIC Gold vs. Titanium comparison.
AzlinkPRO: Legacy NuWave PIC Models Comparison
Compare the key features, then see current product details and pricing on Amazon.
Check model controls, power, cookware fit and availability
Check model controls, power, cookware fit and availability
Check model controls, power, cookware fit and availability
As an Amazon Associate, we may earn a commission from qualifying purchases.
NuWave PIC Titanium Review: Specs and Limits
The NuWave PIC Titanium portable induction cooktop is a single induction zone for magnetic cookware. It adds a cooking zone where your electrical capacity and building rules allow, but it does not replace a full-size range. What sets it apart from NuWave’s cheaper PIC Gold is the 50°F floor, the 5°F steps and the included probe, which reads the food’s internal temperature while it cooks.
Listed specifications at a glance
| Spec | What NuWave lists | Note |
|---|---|---|
| Model | 30291LW | Check the label; older Titanium units have different specs |
| Maximum power | 1,800 W at 115 V rated | About 15 A on a 120 V outlet (1,800 divided by 120) |
| Wattage settings | 700, 1,500 and 1,800 W | The 700 W setting helps on weaker or shared circuits |
| Temperature range | 50°F to 575°F | Some Amazon listings say 100°F; NuWave’s page says 50°F |
| Temperature steps | 5°F (106 settings, 6 presets) | A control increment, not proof of 5°F accuracy at the pan |
| Digital probe | Included; reads food at 50°F to 212°F | Target temperature settable from 50°F to 480°F |
| Safety features | Stops heating when the pan is removed; shuts off when the set cook time ends | Not a substitute for supervision |
| Size and weight | 14 × 12.31 × 2.63 in; 8 lb | 12.31 in is the unit’s width, not the maximum pan size |
Source: NuWave’s PIC Titanium product page, checked November 1, 2026. These are manufacturer figures, not our measurements.
Features and practical limits
Low-temperature control and the probe. The 50°F floor and 5°F steps are the Titanium’s main draw. They make it practical for holding sauces, melting chocolate or keeping food warm, which many single burners handle poorly. The probe lets you cook to a target food temperature instead of a surface setting. Treat both as a guide and confirm with a separate thermometer when food safety depends on it.
Pan size. NuWave lists the unit at 12.31 inches wide. That is the body, not the heating coil, so it does not tell you the largest pan that will heat evenly. A wide stockpot will often heat in the center first. Check the manual for the recommended pan-base diameter and keep heavy, full pots within its limits.
Electrical requirements. At 1,800 W a 120-volt appliance draws about 15 A, the full rating of a standard 15-amp household circuit. Use the 1,500 W or 700 W setting if the circuit also feeds a kettle, toaster or microwave, and follow NuWave’s electrical instructions. To compare other single-burner models, see our portable induction cooktop guide.
Where it fits. It suits small kitchens, extra capacity during holidays and temporary setups with a suitable outlet. NuWave markets it for tabletop cooking such as fondue and hot pot. Dormitories, rentals and temporary housing often restrict cooking appliances, so confirm the rules first.
Cleaning and storage. Switch it off and let the pan and glass cool before wiping. The glass is heated by the pan and can stay hot after cooking. For the manual, see NuWave’s site or our induction cooktop manuals page.
Pros
- 1,800 W maximum with 700 W and 1,500 W settings for weaker circuits
- 50°F to 575°F in 5°F steps, finer and lower than the PIC Gold’s 100°F floor and 10°F steps
- Digital probe included for cooking to a target food temperature
- Stops heating when the pan is removed and shuts off when the cook time ends
- Still sold by NuWave, so manuals and support are current
Cons
- Needs cookware with a magnetic base
- At full power it uses the whole of a standard 15-amp circuit
- Costs about $20 more than the PIC Gold at NuWave’s November 2026 list prices
- Older Titanium units with different specs are still sold, so check the model number
- One zone only, and we have not tested speed, accuracy or long-term reliability
Conclusion
The NuWave PIC Titanium makes the most sense if you want low-temperature control and a probe in a portable burner and have a circuit that can carry about 15 A. If you mainly boil, sauté and simmer, the PIC Gold covers that for less. Our NuWave PIC Gold vs. Titanium comparison sets the two side by side. Before using it with an older skillet, check the base with our induction-ready cookware guide.
Frequently asked questions
What is the NuWave PIC Titanium’s model number?
NuWave lists the current PIC Titanium as model 30291LW. Resellers still sell older Titanium units under other model numbers, often listed with a 100°F minimum. Check the box or the rating label before relying on the specs above.
Does the PIC Titanium come with a temperature probe?
Yes, according to NuWave. The integrated digital probe reads food from 50°F to 212°F and lets you set a target temperature up to 480°F.
Does 5°F temperature control mean it cooks to within 5°F?
No. The steps are control increments. Even manufacturers say so: the Duxtop 9600LS manual describes its temperature readout as only an estimate of the actual cooking temperature. Use a thermometer when exact food temperature matters.
What cookware works on the NuWave PIC Titanium?
Cookware with a magnetic base, such as cast iron and many magnetic stainless steel pans. NuWave’s test is the common one: if a household magnet sticks firmly to the base, the pan will work. Glass, ceramic, copper and aluminum without a magnetic layer will not heat.
Can I use it outdoors or while camping?
We found no confirmation that it is approved for outdoor use. It needs a suitable outlet, and many campsite or generator supplies cannot deliver 1,800 W, so check the manual and use a lower wattage setting where needed.
Other NuWave PIC Models
To compare every current NuWave model on price and features, see our NuWave induction cooktops compared guide. The table below lists other NuWave PIC models (Flex, 30242 and Pro), not the Titanium reviewed above. Each link goes to Amazon, where current price and availability appear.
